CYP PU-1H2HBTE, Operation Manual

Page: 5 / 12

6
1. INTRODUCTION
The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2
HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs
allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be
transmitted over a Single CAT5e/6/7 cable up to 100m. Installers can
confidently distribute HDMI signals to 3 displays, and if required, use
the HDMI bypass output to cascade the HDMI signal up to 5 times with
additional HDBaseT™ splitters.
PU-507RX Receivers are recommended to utilise the full 5-Play™
functionality of the HDBaseT™ outputs of this device.
2. APPLICATIONS
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1 x HDMI over HDMI & CAT5e/6/7 Transmitter
2 x IR Extender
1×IR Emitter 'Y' Cable
2 x 3.5mm phone jack to D-Sub 9-pin adaptor cable
24V/2.7A DC Power Adaptor
Power Cord
Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment with HDMI output connector
Display TV/monitor with HDMI input connector
HDMI over CAT5e/6/7 receivers with industry CAT5e/6/7 cables