37
Serial over IP
This section provides controls for the Serial over IP extension functionality,
including enabling/disabling Serial support and setting the RS-232 data
configuration.
-
Enable Serial over IP:
Unchecking this checkbox will completely
disable support for sending RS-232 commands over this stream.
This option should generally remain checked, but, if serial support is
not required, disabling this feature can save a very small amount of
bandwidth.
-
Serial Settings:
Set the desired baud rate, data bits, parity, and stop
bit for the RS-232 signal to extend.
Note: The Transmitter and Receiver must have the same serial settings.
