14
2. Network
COMMAND
DESCRIPTION AND PARAMETERS
SET_JUMBO_MTU N1
Enable/disable the jumbo frame MTU.
Available values for N1:
0 [Disabled]
1 [Enabled]
GET_JUMBO_MTU
Show the jumbo frame MTU state.
3. System
COMMAND
DESCRIPTION AND PARAMETERS
GET_HARDWARE_VERSION
Show the current hardware version.
FACTORY_RESET N1
Perform a factory reset on the unit
and select the IP mode after the reset
completes.
Available values for N1:
0
[Reset into Static IP
mode]
1
[Reset into Auto IP
mode]
REBOOT
Reboot the unit.
4. Transmitter Specific
COMMAND
DESCRIPTION AND PARAMETERS
SET_TX_CHANNEL N1
Set the VoIP transmission channel.
N1 = 0~255
GET_TX_CHANNEL
Show the current VoIP transmission
channel.
SET_PQ_MODE N1
Set the Tx video optimization mode.
Available values for N1:
0
[Graphic optimised
mode]
1
[Video optimised
mode]
GET_PQ_MODE
Show the current Tx video optimization
mode.
