CYP EL-8500VA, Operation Manual

Page: 40 / 88

40
6.6.4 Audio Tab
This tab provides control over how audio is routed within the unit as
well as control over audio mixing, individual output volume and the
microphone’s gain level.
1) Audio Settings:
■ HDMI Volume & Mute:
Set the volume level, or mute the audio,
for the HDMI and HDBaseT audio outputs.
Note: Not active when HDMI audio Out Bypass is enabled.
■ Analog Volume & Mute:
Set the volume level, or mute the audio,
for the unamplified (5-pin terminal block) analogue audio output.
Note: LPCM 2.0 sources only.
■ Speaker Gain & Mute:
Set the volume level, or mute the audio, for
the amplified (2x 2-pin terminal blocks) analogue audio output.
Note: LPCM 2.0 sources only.