20
6.7 telnet control
Before attempting to use the Telnet control, ensure that both the Scaler
(via the LAN port) and the PC/Laptop or control system being used are
connected to the same active network.
To access the Telnet control in Windows 7, click on the "Start" menu and
type "cmd" into the Search field then press enter (see below for reference).
Under Windows XP, go to the "Start" menu and click on "Run", type "cmd"
then press enter (see below for reference).
Under Mac OS X, go to the file menu then navigate to Go
→
Applications
→
Utilities
→
Terminal (see below for reference).
Once in the command line interface (CLI) type "telnet" along with the the
IP address of the unit you wish to control. This will bring us into the device
which we wish to control.
Note: The IP address can be obtained from the OSD menu under Information.