28
6.9 WebGUI Control
Please enter the IP address displayed on the “Ethernet Settings” menu of
the OSD into a web browser to connect to the scaler’s WebGUI.
The WebGUI is divided up into multiple sections (Input, Lock, Information,
Display, Picture, Audio, Miscellany, and Factory) allowing for all functions
of the unit to be viewed and controlled directly. If desired, the numerical
value for many of the items can be entered directly by typing it in the box
above the slider bar. Press “Enter” to accept the newly entered value.
INPUT:
This section allows for control of input selection with a choice
between HDMI1, HDMI2, DP, PC1, and PC2. Once a selection is made, the
switch will occur immediately.
LOCK:
This section provides a way to turn the front panel lock on and off.
INFORMATION:
This section provides details about the current input and
output signals, as well as the firmware version of the unit.
DISPLAY:
This section allows for control of the output resolution, size (aspect
ratio), and HDCP behavior for all 3 digital inputs on the unit. There are also
controls for the signal type expected by each PC input. Enabling "Comp In"
for a PC input allows YUV (component video) signals to be used.
Summary of Contents for EL-5400-HBT
Page 2: ......
