CYP CSC-5501TX Operation Manual Download Page 8

Page: 8 / 60

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

HDMI

VGA

–

ENTER

720P

XGA

Multi-Format to HDMI Switcher/Scaler

1 2

POWER Button & LED:

Press this button to power the unit on (Green

LED) or place it into stand-by mode (Red LED).

IR Window:

Accepts IR signals from the included IR remote for

control of this unit only.

DP/HDMI/VGA Buttons & LEDs:

Press any of these buttons to switch

immediately to the corresponding input. An LED will illuminate to

indicate which source is currently selected.

MENU Button:

Press to enter the OSD menu, or to back out from

menu items.

Note: Pressing and holding the “MENU” button while connecting

the power supply will reset all settings to the factory defaults.

Pressing “MENU” and “+” together will reset the output resolution to

XGA (1024×768@60Hz). Pressing “Menu” and “−” together will reset

the output resolution to 720p@60Hz.

− & + Buttons:

Press to move up and down or adjust selections

within menus.

Note: When not in the OSD, pressing “−” will activate the Auto

Adjust function for VGA sources. Pressing “+” will briefly show the

OSD information display.

ENTER Button:

Press to confirm a selection within the OSD or to go

deeper into a menu item.

Summary of Contents for CSC-5501TX





























































Search results

Summary of Contents for CSC-5501TX

Reviews:

Related manuals for CSC-5501TX

Brands by name

Popular brands

CYP CSC-5501TX, Operation Manual

Search results

Summary of Contents for CSC-5501TX

Reviews:

Related manuals for CSC-5501TX

Brands by name

Popular brands