CYP CSC-5501TX, Operation Manual

Page: 10 / 60

5
the HDBaseT Receiver.
5 IR IN: Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being
used is within direct line-of-sight of the IR Extender.
6
IR OUT: Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
7 CAT5e/6 OUT: Connect to a compatible HDBaseT Receiver with a
single Cat.5e/6/7 cable for transmission of all data signals.
8
LAN: Connect directly, or through a network switch, to your PC/
laptop to control the unit via Telnet/WebGUI and to extend the
network to both ends of the HDBaseT connection.
9
RS-232: Connect directly to a PC, laptop or other serial control
device to send RS-232 commands to control the unit.
10
SERVICE: This slot is reserved for firmware update use only.
11
DC 24V: Plug the 24V DC power adapter into this port and connect
it to an AC wall outlet for power.