9
6.2 Rear Panel
RS-232 BYPASS
RS-232
COAX.
AUDIO
LAN
AUDIO
INPUT
SERVICE
HDMI
HDMI 1
HDMI 2
HDMI 3
PC 1
PC 2
PC 3
Cr/Pr
Cb/Pb
Y
R
L
CV
POWER
DC 24V
PC/HD
OUTPUT
IR
BLASTER
IR
R
L
EXTENDER
CAT5e/6/7
OUTPUT
1
7
8
9
10
13
2 3
4
5
6
11
12
14
1
CAT5e/6/7 OUT:
Connect to a compatible HDBaseT Receiver with a
single Cat.5e/6/7 cable for transmission of all data signals.
HDMI OUT:
Connect to an HDMI TV, monitor or amplifier for digital
video and audio output.
PC/HD OUT:
Connect to a monitor/display for video output. For HD
(Component) output, use the supplied D-Sub 9-pin to 3 RCA adaptor
cable for HD resolutions from 480p~1080p.
Note: When the selected HDMI input source signal has HDCP content the
VGA/Component output will not display any image.
2
IR EXTENDER:
Connect to the provided IR Extender to extend the
IR control range of remotely located devices. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
3
IR BLASTER:
Connect to an IR Blaster to transmit IR signals to devices
within direct line-of-sight of the IR Blaster.
4
RS-232 BYPASS:
Connect to a PC, laptop or other serial control device
for the extension of RS-232 signals across the HDBaseT connection.
5
RS-232:
Connect directly to a PC, laptop or other serial control device
to send RS-232 commands to control the unit.
6
COAX OUT:
Connect to an amplifier or active speakers for digital
audio output.
Note: When the AUDIO SOURCE setting is set to “AUTO” the coaxial output
supports passing standard HDMI 1.2 bitstream formats.
AUDIO OUT:
Connect to an amplifier or active speakers for audio
output in stereo format.
Note: If the source format is bitstream, this output will be muted
automatically.
7
HDMI IN 1~3:
Connect to HDMI source equipment such as media
players, game consoles or set-top boxes.
