11
6.3 Remote Control
1
POWER:
Press this button to power the unit on or
place it into stand-by mode.
2
HDMI 1~3/PC 1~3/CV/COMP:
Press any of
these buttons to switch immediately to the
corresponding input.
3
MENU:
Press this button to enter the OSD menu.
4
EXIT:
Press this button to exit the menu or the
current selection in the OSD menu.
5
OK/
/
/
/
& VOL/−/+:
Press OK to confirm the
selection or press the arrow buttons to navigate the
OSD menu. When the OSD menu is not active, use
the LEFT/RIGHT (
◄/►
) buttons to control the volume level.
6
AUTO ADJUST:
Press this button to activate the Auto Adjust function
for VGA sources.
7
RESET:
Press this button to reset the device back to the default
settings.
6.4 IR Cable Pinouts
3
1
2
Infrared
Power
Ground
IR Extender
3
1
2
IR Blaster
Power
Infrared
NC
2
1
4
3
5
7
6
