21
INPUT
This section allows for control of input selection.
STATUS
This section provides information about the unit’s current input, and
output as well as the current Firmware Revision.
DISPLAY
This section allows for control over the output resolution, aspect ratio,
HDCP behavior of the HDMI inputs, as well as configuring the information
OSD’s behavior.
PC
This section is only active when a PC source is selected. These settings
control the input specifications to use with the VGA inputs. Activating
the Auto Setup function forces the unit to attempt to detect the correct
values. Selecting reset will reset all VGA input settings.
Note: The "Auto Setup" function requires a VGA source with a bright, edge-to-
edge, image to accurately judge the dimensions of the signal.
COLOR
This section provides detailed controls for the output R/G/B levels,
contrast, saturation, brightness, hue, and sharpness as well as controlling
noise reduction.
AUDIO
This section provides control over all audio output of the unit. The
universal output volume level, audio delay, and muting. The audio
source priority for all HDMI inputs is also made here. Selecting “Auto” will
prioritise HDMI audio, if present, over audio from the associated analogue
audio inputs. Selecting “EXT.” will force the HDMI inputs to use the
associated analogue audio inputs.
SETUP
This section provides access to control over the front panel key lock and
the unit’s power save mode. It also allows for resetting the entire unit to
its factory defaults.
-
KEY LOCK:
When key lock is enabled, no inputs or settings can be
