10
MAIN MENU
LEVEL 2
LEVEL 3
HDCP Control
In 1
Apple Mode
Refer Source
REFER SINK
In 2
Apple Mode
Refer Source
REFER SINK
Out A~H
[HDCP Status
Information]
1
In 1:
Sets the HDCP mode to use with Input 1.
2
In 2:
Sets the HDCP mode to use with Input 1.
3
Out A~H:
Show the current HDCP status of each Output (A~H).
MAIN MENU
LEVEL 2
LEVEL 3
CEC Control
Auto Active
On
OFF
Auto Standby
On
OFF
Out A~H
[CEC Address
Information]
1
Auto Active:
Enable or disable sending the CEC “active source”
command to connected displays every 10 minutes.
Note: The connected display must support the CEC “active
source” command.
2
Auto Standby:
Enable or disable sending the CEC “standby”
command to connected displays if there has been no live input
source detected for more than 10 minutes.
Note: The connected display must support the CEC “standby”
command.
3
Out A~H:
Shows the CEC address of each connected display.
Summary of Contents for CPLUS-V8PT
