5
COMMAND
DESCRIPTION & PARAMETERS
?
Show the full command list.
HELP
Show the full command list.
P1
Power the unit on.
P0
Power the unit off (Stand-by mode).
P?
Show the current power state.
SOURCEDET
Show the current input source detection
state.
SINKINFO
Show information about the currently
connected display.
HDCPIN N1
Set the HDCP handling mode for the HDMI
input.
Available values for
N1
:
1
[Follow Input]
2
[Follow Output]
3
[Apple Mode]
HDCPIN ?
Show the current HDCP handling mode.
ECHO N1
Set the console text echo mode behavior.
Available values for
N1
:
0
[Text echoing is off]
1
[Text echoing is on]
ECHO ?
Show the current text echoing mode.
FADEFAULT
Reset the unit to the factory defaults.
VER
Show the unit’s current firmware version.
REBOOT
Reboot the unit.
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
