CYP CPLUS-21FRX, Operation Manual

Page: 8 / 28

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERVICE POWER 1 2
IN
4K UHD+ HDMI / FIBER
RECEIVER
3 2 1
1
SERVICE: This slot is reserved for firmware update use only.
2
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
3 IN Button & LEDs: Press this button to sequentially switch through
both inputs and mute. The LED will illuminate solid to indicate
which source is currently selected. When both LEDs are blinking,
the output is muted.
6.2 Rear Panel
DC 5V RS-232
CONTROL
FIBER 2
HDMI 1 HDMI OUT
IN
3
2 1
4 5
1
HDMI OUT: Connect to an HDMI TV, monitor or amplifier for digital
video and audio output.
2
HDMI 1 & FIBER 2 IN: Connect to HDMI source equipment such
as a media player, game console or set-top box. Connect the
fiber (paired LC) input to the fiber output from a compatible fiber
Transmitter or Transceiver unit.
3
CONTROL: Connect directly, or through a network switch, to your
PC/laptop to control the unit via Telnet/WebGUI.
4
RS-232: Connect, via the provided 9-pin adapter cable, to a PC,
laptop or other serial control device to send RS-232 commands to
control the unit.
5 DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.