9
• System Settings Tab
This tab provides access to control a number of system configuration
controls including displaying the unit’s serial number, modifying the
web access privileges, changing the IP configuration, performing a
factory reset, rebooting the system, and updating the firmware.
1) Serial Number:
Displays the unit’s serial number.
2) Web User Setting:
This section provides A way to change the
password for the Administrator account. Click on “Save” to confirm
and activate any changes made to these settings.
Note: The default password is “admin”.
3) Network:
The IP Address, Netmask and Gateway can be set
manually, or DHCP can be enabled for automatic IP Configuration
if your local network supports it. Click on “Save” to confirm and
activate any changes made to these settings.
Note: If the IP address is changed then the IP address required for
WebGUI or Telnet access will also change accordingly.
4) System
■ Reboot:
Click this button to reboot the unit.
■ Factory Default:
Click this button to reset the unit to the factory
default settings.
5) Firmware Upgrade:
To update the unit's firmware, click the “Choose
File” button to open the file selection window and then select
Summary of Contents for CPLUS-21FRX
Page 1: ...CPLUS 21FRX 4K UHD HDMI over Fiber Receiver Operation Manual Operation Manual ...
Page 2: ......
Page 27: ......
Page 28: ...CYPRESS TECHNOLOGY CO LTD www cypress com tw ...