CYP COH-TR7, Operation Manual, Page: 11 / 32

6
6 AUDIO Port:
A
Transmitter Mode: Connect to the stereo analog output of a
device such as a CD player or PC.
B Receiver Mode: Connect to powered speakers or an amplifier
for stereo analog audio output.
Note: The signal is passed directly from the audio port on the
transmitter to the audio port on the receiver in Point-to-Point
configurations.
7
IR OUT Port: Connect to an IR Blaster to broadcast IR signals from
a connected transmitter/receiver to devices within direct line-of-
sight of the IR Blaster.
Note: Currently, only 38KHz IR signal extension is supported.
8
IR IN Port: Connect to an IR Extender to receive IR control
signals and extend them to devices connected to a connected
transmitter/receiver. Ensure that the remote being used is within
direct line-of-sight of the IR Extender.
Note: Currently, only 38KHz IR signal extension is supported.
9
SERVICE/USB 2.0 (Mini B) Port:
Connect directly to a standard USB host such as a PC or laptop
to extend their USB functionality to all currently connected/routed
USB devices.
Note: This port is only active when “USB Control Mode” is set to
“Device”. In a Point-to-Point extension configuration, only one
transceiver should be set as a USB Device at a time.
10 RS-232 Terminal Block: Connect directly to a PC, laptop or serial
controllable device with a 3-pin adapter cable to extend the RS-
232 signal between a transmitter and receiver.
11
DC 12V Port: Plug the 12V DC power adapter into this port and
connect it to an AC wall outlet for power.