
5
6
MENU Button:
Press to enter the OSD menu, or to back out from
menu items.
7
− (MINUS) Button:
Press to move up or adjust selections within OSD
menus. When not in a menu, press to manually switch between
inputs.
8
+ (PLUS) Button:
Press to move up or adjust selections within OSD
menus. When not in a menu, press to manually switch between
inputs.
9
ENTER/INFO Button:
When inside an OSD menu, press to confirm a
selection or to go deeper into a menu item. When not in a menu,
press to activate the Information OSD.
6.2 Rear Panel
SFP+
DP IN
HDMI IN
HDMI OUT
SERVICE/USB
IR IN
IR OUT
AUDIO
LAN
RS-232
TX RX
DC 12V
11
10
9
8
7
6
5
4
3
2
1
1
HDMI OUT Port:
Connect to an HDMI TV, monitor or amplifier for
digital video and audio output.
2
HDMI IN Port:
Connect to HDMI source equipment such as a media
player, game console or set-top box.
3
DP IN Port:
Connect to DisplayPort source equipment such as a PC
or laptop.
4
SFP+ Port:
Insert a standard SFP+ module, and connect the
appropriate optical cable to allow data transmission to a
compatible Receiver/Transmitter or to a 10-gigabit optical fiber
network switch.
Note: The SFP+ module must support a dual-optical fiber
connection style, such as LC, or be pre-terminated dual-optical
fiber cables. Single-mode and multi-mode support is dependent
on the SFP+ modules used.
5
LAN Port:
Connect to an Ethernet supporting device or to your
local network as appropriate to extend the network between the
transmitter and receiver.
Summary of Contents for COH-TR7
