CYP CLUX-18CEC, Operation Manual

Page: 8 / 12

7. Operation Controls and Functions
7.1 Front Panel
① ② ③ ④ ⑤
①
Power Switch: This switch turns the system on and off.
②
Power LED Indicator: This LED is green when power is on, and red when
power is off.
③
Sync LED: When an HDMI source is connected to the input port, this
LED will turn on once the splitter has established a Link with the source.
④
CEC button & LED: Press this button to turn the CEC function on or off.
The yellow LED will turn on once the CEC is on. Factory default setting is
set on.
Note:
1. In order to perform the CEC function, both source and display
must support CEC.
2. The standby mode will only activate when the last TV is switched to
standby.
3. All four HDMI outputs must have CEC support.
7.2 Rear Panel
① ② ③
①
HDMI Input: This slot is where you connect the output port of your HDMI/
DVI source (i.e., DVD, set-top box) using an HDMI/HDMI to DVI adaptor
cable.
②
HDMI output 1~8: These slots connect to the HDMI displays through
the splittler, using HDMI cables. If more than one output is connected, all
corresponding HDMI outputs will simultaneously display an identical
videosignal.
③
Power: This slot is where you insert the 5V DC power supply after its
plugged into an AC outlet.
4