3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
LAN
RX LINK
TX POWER
3
2
1
SELECT
2
5
1
3
4
1
SELECT Button:
Press this button to manually toggle the unit between
Tx and Rx mode.
Note: The connected transceiver device will also change modes.
2
USB 2.0 (Type A) Device Ports:
Connect directly to standard USB
devices such as a mouse, keyboard or flash drive to extend their USB
functionality to the currently active USB Host Port.
Note: These ports are always active, regardless of Tx/Rx mode.
3
USB 2.0 (Mini B) Host Port:
Connect directly to a USB host such as a
PC or laptop to extend their USB functionality to all currently connected
USB devices.
Note: This port is only active when the unit is in Rx mode. Connecting a
live host to a unit that is in Tx mode will automatically switch the unit to
Rx mode.
4
LAN Port:
Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to all LAN ports at both
ends of the HDBaseT connection.
5
Status LED Block:
TX LED:
This LED will illuminate solidly when unit is in Tx mode.
RX LED:
This LED will illuminate solidly when unit is in Rx mode.
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
LINK LED:
This LED will illuminate solidly when a live connection with a
compatible receiver is active.
