CYP CH-352TX, Operation Manual, Page: 9 / 36

4
6.2 Rear Panel
RS-232 LAN
DC 5V
IN 1 IN 2
IR
OUT
AUDIO
OUT IN USB
8 2 7 6 3 4 5 1
1
OUT 1 Port: Connect to HDMI source equipment such as a media
player, game console or set-top box.
Note: When paired with it’s standard dual HDMI receiver, this input will
route directly to the Out 1 port on the connected receiver.
2
AUDIO IN Port: Connect to the stereo analog output of a device such as
a CD player or PC.
Note: When a live audio source is connected to the Audio In port, it
will be automatically embedded into the transmitted signal, and will
completely replace any existing HDMI audio when the unit is in “Auto”
Audio over IP mode.
AUDIO OUT port: Connect to powered speakers or an amplifier for
stereo analog audio output. This will output the audio from the Audio In
on the connected receiver.
Note: The Audio In audio channel from the receiver is only active
when an analog source is also connected to the Audio In port on the
transmitter.
3
IR OUT Port: Connect to the provided IR Blaster to transmit IR signals
sent from the associated receiver to devices within direct line-of-sight of
the IR Blaster
4
IN 2 Port: Connect to HDMI source equipment such as a media player,
game console or set-top box.
Note: When paired with it’s standard dual HDMI receiver, this input will
route directly to the Out 2 port on the connected receiver.
5
USB 2.0 (Type-B) Port: Connect directly to a PC host to extend its USB
functionality to the USB device ports on the connected receiver.
6
RS-232 Port: Connect to a PC, laptop, or serial controllable device for
the extension of RS-232 signals.
Note: The baud rate is configurable, but the default baud rate is 115200.
7
LAN Port: Connect via a Gigabit Ethernet switch to compatible receiver
to transmit video and data, and to a PC/laptop to control the unit via
WebGUI or Telnet.
8
DC 5V Port: Plug the 5V DC power adapter into this port and connect it
to an AC wall outlet for power.