CYP CH-352TX, Operation Manual, Page: 17 / 36

12
„
Find Your Device: Selecting “Show Me” will cause the unit to
immediately begin flashing the LEDs on the front of the unit to make
it easy to find. Selecting “Hide Me” returns the LEDs to their normal
behavior. This setting is useful when troubleshooting an installation
with a large number of units in a rack.
2) Reboot: Pressing this button will force the unit to reboot.
6.5.3 Functions Tab
The Functions tab provides control over the transmitter’s AV source
management, streaming bandwidth/quality settings, as well as defining
how audio and serial signals are handled (transmitter 1 only). The available
controls are different depending on whether you are connected to transmitter
1 or 2. Changes made to these settings may require a reboot. Please follow
the reboot instructions in the WebGUI, if necessary.