15
6.7 Telnet Commands
COMMAND
Description and Parameters
help
Show the full command list.
help N1
Show details about the specified command.
N1
= {Command}
get_hardware_version
Show the receiver's current hardware version.
get_firmware_version
Show the receiver's current firmware version.
set_device_name N1
Set the receiver’s device name.
N1
= {Name}
[29 characters max]
get_device_name
Show the receiver’s current device name.
factory_reset N1
Perform a factory reset on the receiver and select the IP Mode to use
after the reset completes.
Available values for
N1:
0
[Reset into Static IP mode]
1
[Reset into Auto IP mode]
reboot
Reboot the unit.
get_ipconfig
Show the receiver's current IP configuration information.
