32
COMMAND
Description and Parameters
set out auto mode N1
Set the auto switching behavior of the unit.
Available values for
N1
:
0
[Auto
switch
disabled]
1
[Auto
switch
enabled]
get out auto mode
Show the current auto switching mode of the unit.
set out A osd timeout N1
Set the OSD’s timeout value for the HDMI output or disable the timeout.
Available values for
N1
:
0
[No
timeout]
1~100
[Timeout in seconds]
get out A osd timeout
Show the current OSD timeout value for the HDMI output.
set out A osd hposition N1
Set the horizontal position of the OSD on the HDMI output.
N1
= 0~100
[Horizontal position]
get out A osd hposition
Show the current horizontal position of the OSD on the HDMI output.
set out A osd vposition N1
Set the vertical position of the OSD on the HDMI output.
N1
= 0~100
[Vertical position]
get out A osd vposition
Show the current vertical position of the OSD on the HDMI output.
set out A osd transparency N1
Set the transparency level of the OSD on the HDMI output.
N1
= 0~7
[Transparency level]
