manualshive.com logo in svg

CYP CH-2540RX, Operation Manual

Share
Download
CYP CH-2540RX Operation Manual Download Page 26

21

6.7.5 Automation Tab

This tab provides control over the unit’s automatic control command 

broadcast behavior when any of the specified Automation Events occur. 

Automation commands can be sent to connected devices via IR, CEC, and 

RS-232.

1) Event: 

Use the dropdown to select the Automation Event to configure. 

Available Automation Events are:

■  Power On: 

This unit is powered on.

■  Out A Source Active:

 The currently selected input changes from  

  inactive to active.

■  Out A Source Lost:

 The currently selected input changes from    

active to inactive.

2) IR: 

Enable or disable sending an IR command when the currently 

selected Automation Event is activated.

■ 

Delay:

 Set the length of time, in seconds, that the specified  

Automation Event must continue to be true before sending the 

defined IR command.

■ 

Wait: 

Set the length of time, in seconds, to wait after this IR 

Automation Event has been activated before ANY other  

Automation Event can be detected.

Summary of Contents for CH-2540RX

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands