CYP CDPW-K1US, Operation Manual

Page: 8 / 24

3
6.2 Rear Panel
DC 5V
+
Control
-
Relay
Out
1 3 2
1
RELAY OUT: Connect with device that supports DC 0~24V/5A
power or signal that supports relay function.
2
Control: Connect from PC/Laptop with active internet service or
Telnet or WebGUI control with RJ-45 terminated cable. This slot
supports PoE PD 48V function which means when the connected
server/Hub support PSE 48v it can be powered without DC supply
connection.
3
DC 5V: Plug the 5V DC power adaptor included in the package
and connect to AC wall outlet for power supply.
6.3 Telnet Commands
COMMAND DESCRIPTION PARAMETER
IPCONFIG Display the current IP
configure
NONE
SIPADDR XXX.
XXX.XXX.XXX
Set ethernet IP address XXX=0~255
SNETMASK XXX.
XXX.XXX.XXX
Set ethernet net mask XXX=0~255
SGATEWAY XXX.
XXX.XXX.XXX
Set ethernet gateway XXX=0~255
SIPMODE N Set ethernet IP mode N=STATIC/DHCP