72
COMMAND
Description and Parameters
SET SAVE PRESET N1
Save all current routing and window assignments to the specified
preset.
N1
= 1~5
[Preset number]
SET RECALL PRESET N1
Activate the routing and window assignments saved in the
specified preset.
N1
= 1~5
[Preset number]
SET PRESET N1 NAME N2
Set a name for the specified preset.
N1
= 1~5
[Preset number]
N2
= {Preset name}
[18 characters max]
GET PRESET N1 NAME
Show the current name of the specified preset.
N1
= 1~5
[Preset number]
GET HDBT OUT A CABLE TEST
Show the cable test result for the HDBaseT output.
Note: Uses the highest available source resolution without
exceeding 4K@60Hz 4:2:0.
SET FEEDBACK BROADCAST N1
Enable or disable the command feedback broadcast display.
Available values for
N1
:
OFF
[Disabled]
ON
[Enabled]
GET FEEDBACK BROADCAST
Show the current command feedback display state.
GET COMMAND VER
Show the unit’s current command version.
