24
Note: Only available in Switcher mode when “Standard” switching
is selected.
3) Input Auto Switch:
Enable or disable the unit’s auto switch feature.
Note: Only available in Switcher mode.
4) Auto Switch Delay:
Set the length of time to wait, after a source is
no longer detected, before automatically switching.
Note: Only available in Switcher mode.
5) HDBT Performance:
Select this to perform a basic connection
quality test between the unit and a connected HDBaseT receiver.
6) Test Pattern:
Select an internally generated test pattern, displayed
on both outputs, to perform basic tests of the connected sinks.
Note: When a test pattern is active, no inputs will be visible.
7) Preset Save:
Select one of the 5 Presets to store the unit’s current
output configuration.
8) Preset Recall:
Select one of the 5 Presets to restore and use its
saved output configuration.
9) Preset Rename:
Select one of the 5 Presets to edit its name (up to
18 characters).
