6
1. INTRODUCTION
This new collaboration Transmitter and Receiver system is a convenient
turnkey solution for video selection and extension in conference rooms,
classrooms and showrooms. These units provide not only AV conversion
and extension but also an intelligent and easy way to control devices
throughout the entire venue. The three most common input interfaces
(HDMI, DisplayPort, and VGA) are supported by the Transmitter, providing
the ultimate in source compatibility and flexibility. The HDMI and
DisplayPort inputs both support resolution/timing up to a maximum of
4K@60Hz (4:4:4, 8-bit) which is converted, as appropriate, for transmission
over HDBaseT. The selected source can be transmitted over Cat.6/7 cable
up to 70m (at 4K@60Hz). The Receiver can scale the HDBaseT video
source, or local HDMI input, to match the connected display’s resolution
requirements.
The Transmitter also provides an interface for a remote control keypad, or
trigger interface, which can be easily installed within a podium or within
a table in a conference room or classroom. This interface can allow the
user to control a wide range of devices by activating single commands or
complex macros and sending commands out over the local network. In
order to provide a more robust selection of control options, the Receiver
also supports 2 relay connections, providing instant control over projector
screens, curtains, lights, etc. The unique macro programmability allows
for the implementation of multiple command activations from a single
button press. These units are controllable via top panel controls (with
OSD), WebGUI, Telnet, and RS-232.
2. APPLICATIONS
Conference room display
Classroom display
Showroom display
