10
6.2 Transmitter's Front and Rear Panels
LAN
SERVICE
RS-232
TRIGGER IN
IR OUT
IR IN
1
2
3
4
5 6
1
TRIGGER IN:
This 10 pin terminal block provides 8 trigger pins for
activating functions and macros within the unit. 5V and ground pins
are also provided for compatibility and use with the optional Trigger
Keypad unit.
2
SERVICE:
This slot is reserved for firmware update use only.
3
RS-232:
Connect to a PC, laptop or other serial control device to send
RS-232 commands to control the unit.
4
LAN:
Connect directly, or through a network switch, to your PC/laptop
to control the unit via Telnet/WebGUI and to extend the network
across the HDBaseT connection.
5
IR IN:
Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being used
is within direct line-of-sight of the IR Extender.
6
IR OUT:
Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
Note: The IR In/Out ports are multi-function and may be reconfigured as
IR Control, IR Emitter, and IR Learner in addition to the basic IR Bypass
functionality.
AUDIO IN
HDMI IN
DP IN
HDMI OUT
CAT 5e/6/7 OUT
VGA IN
2
3
4
5
6
1
1
CAT5e/6/7 OUT:
Connect to a compatible HDBaseT Receiver with a
single Cat.5e/6/7 cable for transmission of all data signals.
2
HDMI OUT:
Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.
Note: This HDMI output is bypass only and is independent from the
timing/colour space transmitted over the HDBaseT output.
