33
4. Control System Commands
COMMAND
DESCRIPTION AND PARAMETERS
SET EVENT N1 TIMER N2
Set Event N1’s hold timer duration to N2
seconds.
N1 = 1 ~ 64
[Event number]
N2 = 0 ~ 65535 [Seconds]
Note: Not used in all Event modes.
GET EVENT N1 TIMER
Show Event N1’s hold timer duration.
N1 = 1 ~ 64
[Event number]
SET EVENT N1 DELAY N2
Set Event N1’s delay value to N2 seconds.
N1 = 1 ~ 64
[Event number]
N2 = 0 ~ 65535 [Seconds]
GET EVENT N1 DELAY
Show Event N1’s delay.
N1 = 1 ~ 64
[Event number]
SET EVENT N1 REPEAT N2
Set the number of repetitions to use when
Event N1 is in repeat mode.
N1 = 1 ~ 64
[Event number]
N2 = 0 ~ 255
[Repeat count]
GET EVENT N1 REPEAT
Show Event N1’s repeat count when in
repeat mode.
N1 = 1 ~ 64
[Event number]
GET EVENT N1 BOOK
Show the detailed description of Event N1’s
actions.
N1 = 1 ~ 64
[Event number]
SET EVENT N1 DELETE
Delete Event N1.
N1 = 1 ~ 64
[Event number]
