CynkoMet T-104/4, Instructions For Use And Operation

Page: 40 / 127

Cynko Met
T-104/4
T-104/5
Page 40
4.3.3 Connecting and disconnecting with the tractor.
The trailer can be connected to the agricultural tractor, if all
connections (electrical, pneumatic, hydraulic), and the hook in the agricultural
tractor comply with the requirements of the Manufacturer of the trailer and
the Manufacturer of the tractor.
In order to connect the trailer to the tractor, perform the following
steps:

Prior to coupling with tractor, check if the trailer is braked with the parking
brake.

Set the drawbar hitch anchorage on the height of the transport hitch of the
tractor (this can be achieved by adjusting the drawbar spring tension).

Reversing the tractor, connect the drawbar end with the upper transport
hitch of the tractor (if in the agricultural tractor, an automatic coupler is used,
ensure that the aggregate operation has been completed correctly and the
drawbar anchorage is secured).

Stop the tractor engine.
 Install and secure the pivot pin from falling out or check the automatic hitch.

Connect with the electric, hydraulic and brake installation wiring with the
trailer.

Release the parking brake of the machine.