NOTE!
Optimal washing and drying results are achieved by using
normal dishwasher detergent together with separately
dispensed rinse aid and salt.
The main power switch
Press and hold the main power switch until the display lights
up. Also check that the water tap is on.
PROGRAM - Select a program
Select a program to suit the type of dishes and how dirty
they are. Eco wash is always pre-selected.
Press the Program selector one or more times until the de-
sired program symbol is activated.
Auto wash
The dishwasher can measure how dirty the dishes are and
adjust water consumption and temperature accordingly.
When newly installed, the program needs to be run five
times before it is fully adapted and can provide the best
results.
Auto wash
1)
+
SpeedWash
An effective program for daily use for slightly dried leftovers.
(This program is not intended for burnt food, such as on
oven dishes.)
Intensive wash
Program for very dirty dishes, such as pans, casserole
dishes and oven dishes. If these dishes do not completely
fill the dishwasher, you can add plates and the like.
Eco wash
This program is intended for cleaning normally dirty dishes
and is the most effective program in terms of combined en-
ergy and water consumption.
Quick dish and dry
This program is used for glasses and porcelain that is slightly
dirty, such as coffee cups.
In combination with SpeedWash, a shorter program is
achieved (30 minutes).
Gentle dish
A gentle dishwashing program with a low temperature for
washing fragile items made of crystal/glass. Remember to
use a small amount of detergent and to place items so that
they do not touch each other during the wash. See also
Fragile dishes in the chapter Loading the dishwasher. Por-
celain that has just been used without dried leftovers can
also be washed using this program.
TILLVAL - Select an option
To select an option, press one of the option buttons until
the option is activated. The available options vary between
program and some options cannot be combined (available
options glow dimly).
SpeedWash
This option shortens the program time, but uses more en-
ergy and water.
Auto open
The dishwasher door opens automatically, which improves
the drying results. Wait until the dishwasher indicates that
the program has ended and the dishes have cooled before
unloading the dishwasher. (If the dishwasher is built-in the
surrounding furnishings must be resistant to any condensa-
tion from the dishwasher.)
NOTE!
The dishwasher door must not be blocked when set to
open automatically. This can disrupt door lock functional-
ity.
HI DRY
This option is intended for situations where demands on
hygiene are especially high, such as when dishwashing
baby bottles and cutting boards. The temperature is in-
creased in both the main wash and the final rinse.
Delayed start
When you select Delayed start the dishwasher will start 1-
24 hours after you close the door.
1. Press the button once to activate Delayed start. Press
the button several times – or hold it in – to set the de-
sired number of hours.
2. Close the door and the dishwasher counts down 1 hour
at a time and starts after the selected delay.
If you want to cancel the Delayed start option, open the door
and press and hold the main power switch until the display
turns off.
1)
This combination (Auto wash + SpeedWash) is also known as QuickIntensive (90 minutes).
29
EN
