Page 4 of 6
Menus flow chart of CYGNUS 850 V.35 Modem
Factory default parameters
System Clock : Line Slave
DSL Type : NT
Framing : Unframed
Root
1.To view unit status
3.For control function
2.To configure the unit
To view unit running
parameters
2.To configure TDM
timeslots
For diagnostics tests &
to view line Statistics
1.To configure system
parameters
3.To configure DSL
port parameters
4.To configure DTE
port parameters
1.To configure System
Clocking mode
5.To specify unit ID
1.To set this to
NO
2.To set this to YES
4.To configure Rate vs Range
trade off
1.To set to 2E11-1
2.To set to
2E15-1
3.To configure Test Pattern
Type
1.To set to
unframed
2Mbps
2.To set to framed nX64kbps
2.To configure Framing
Type
1.
Line Slave
2. DTE Slave
3. DTE XTX 4. Internal
To configure unit ID
6.To specify console port
password
To configure Console
password
7.To store parameters in
NVRAM
To save the parameters
8.To reset the unit
To reset the unit
9.To configure factory
default parameters
To load the factory default
parameters
1.To configure DSL Type
2.To configure DSL Frame
Type
1.DSL Type as LT
2.DSL Type as
NT
1.Frame Type as Sync
2.Frame Type as
Plesio
1.To configure RX Clock
inversion
2.To configure TX Clock
inversion
1.
No
inversion of RX Clock
2.Invert Rx Clock
1.
No
inversion of TX Clock
2.Invert TX Clock
3.To configure Data
inversion
1.
No
data inversion
2.Data invert
1.To configure all timeslots
as IDLE
2.To configure all timeslots
as DTE
3.To configure individual
timeslots
5.To configure Console
Port parameters
1.To configure Console
Port speed
2.To configure Console
Port parity
1.4800 bps 2.
9600 bps
3.19200 bps 4.38400 bps
5.57600 bps
1.Even 2.Odd 3.
None
3.To configure Console
Port Databits
4.To configure Console
Port Stopbits
1.To set this to 7 bit
2.To set this to
8 bit
1.To set this to
1 bit
2.To set this to 2 bit
