24
25
C) Press the ACTIVATION BUTTON. The device will flash, and a warm sensation should be felt.
D) Move the Handset to the next area to be treated and repeat. The device needs to recharge between flashes. This will only take about 0.6
seconds.
E) Ensure that the ENTIRE AREA receives treatment, and treat any stubborn areas (such as underarms) with multiple passes (running your
device over the same area a maximum of 3 times).
Treatment
Window
Full Coverage
Overlapping
Missed Areas
WARNING:
Make sure not to cover the vents on the device whilst treating, as this can lead to the device overheating.
SmoothSkin Bare+ is an extremely fast and powerful device, allowing you to complete a whole body treatment in under 10 minutes.
TREATMENT METHOD – STAMP OR GLIDE?
Stamp Method
This method is recommended for small areas such as the underarm and bikini line. Place the Handset on the skin, press & release the
Activation Button. Remove from the skin before carefully re-applying to the next treatment area.
Glide method
This method is recommended for larger areas such as legs. Place the Handset on the skin, hold down the Activation Button (press
down continuously), then glide the Handset along the skin between flashes. Try to move the Handset at a steady speed that gives full
coverage without overlap or missed areas.
Step 4: Your SmoothSkin Bare+ Treatment Schedule
The SmoothSkin Bare+ should be used weekly for at least 12 weeks or until the desired results are achieved.
Treat
Treat
7 Days
Always wait 7 days before
treating the same area again
Step 5: Switching Off the SmoothSkin Bare+
When the treatment is finished, SmoothSkin Bare+ should be unplugged from the Electrical Outlet.
Refer to
section 9
for details of how best to look after your SmoothSkin Bare+.
