Cycos Cycos ERGO mrs 5.0, Administrator'S Manual

Page: 15 / 46

Web-Administrator
General Procedure
11
2.2 General Procedure
2.2.1 Navigation
After starting the Web Administrator and logging in, you can switch to the different
tabs to view system data or perform the desired modifications.
To navigate between the single tabs use the table of contents at the left window mar-
gin. With some settings additional tabs are displayed that you can leave again using
the
Back button.
1. Click a link at the left window margin to switch to the corresponding tab.
2. As the case may be click the Back button to leave a subordinate tab again and return
to the previous one.
2.2.2 Modifying Settings
To alter current settings you can enter new data (texts or numerals) in the correspon-
ding entry fields. In some cases you can select the desired option only from one list or
activate one or several options by checkmarking. You can perform the respective steps
as customary in other Windows programs.
You can cancel and overwrite wrong entries any time.
2.2.3 Saving Modifications
Setting modifications only take effect when they have been saved. For this purpose
you find the
Save button at the end of each tab. In some tabs it is also possible to save
single parameters by clicking on the respective Ok button.
When you leave a tab without previously pressing the Save or Ok button, the original
settings are maintained. You then need to switch to the corresponding tab and make
your entries again.
Before you save entries in a tab make sure that they are according to your desires and
correct.
Attention!
With changing passwords or PINs make sure that the original codes are no longer valid
when you click the
Save button.