5
2.1.4 Check tyre pressure are correct and tyres are not damaged.
2.1.5 Check reflectors and lights function if fitted.
2.1.6 Make sure the battery is fully charged.
2.1.7 Load the battery into bicycle and turn on with the switch located directly above the battery.
To remove the battery, turn the battery key hold in unlocked position and slide the battery
out. Remove key from battery and keep save during operation of the bike.
2.1.8 Turn on the bike by pressing the on/off switch adjacent to the left hand grip for two
seconds. (Turn off the bike by repeating the same process).
Fig 1
The bike will be ready to ride and the LCD will activate showing battery state, assist level,
time, trip and speed. Turning the pedals for more than ¼ of a revolution will now activate
the motor.
2.1.9 To avoid unplanned acceleration, always make sure that the LCD assist level is set to 0 when
mounting, dismounting and turn the bike off when leaving it unattended.
To set the assist levels, toggle with the + and – buttons (see fig 1)
2.1.10 For full information regarding the LCD display please refer to separate hand book available
from Cycleman Bikes or your retailer.
2.1.11
To avoid the use of a bicycle trailer or outboard bicycle.
2.2
Before each use
It is important you check your bike prior to each time you use it. Checks should include the following:
(If you do find any damage or problems, do not use the bike until the problem has been solved or
you have had the faulty item checked by an electric bike mechanic or your retailer).
2.2.1
Check the tyres for any visible damage.
2.2.2
Check the tyre pressure.
