Page
2
of
7
Bike Operation
1.
Make sure that the drive is stopped before placing the jug on the
front of the bike.
2.
Stretch the bungie cord across the top of the jug and insert the hook
into the hole in the black base on the opposite side.
3.
Adjust the height of the saddle by loosening the thumb screw and
adjusting the seat to the hip height of the
rider.
4.
Do not raise the seat above the minimum insert line.
5.
Retighten the thumb screw.
6.
If the blades aren’t spinning inside the jug, ask the rider to stop
peddling. Grab the front wheel by the tyre and move it forwards and
backwards three times. This will flick stuck ingredients out from
under the blades.
7.
Instruct the rider to peddle for 30 seconds (this is an arbitrary length
of time, go with the reaction of the crowd and have a bit of fun).
8.
When it is time to stop ask the rider to ring the bicycle bell. This
creates further attention and provides an aural experience for the
rider.
