Cyclades PM IPDU, Installation & User Manual

Page: 52 / 102

40
Cyclades PM IPDU Installer/Administrator/User Guide
Examples
To delete the user rog, enter the following.
display
The display command allows logical inversion of the 2-digit, 7-segment display. The purpose of
this command is to allow a PM IPDU to be mounted upside-down. This command is available to
the admin user only.
NOTE: The decimal point will be at the top of the display when the PM IPDU is mounted upside down.
Syntax
display [<IPDU#>|<IPDU_ID> [0|180]]
-or-
display
Arguments
no argument
show display status of all PM IPDUs in the daisy chain
<IPDU#>
number of the PM IPDU in the chain
<IPDU_ID>
Identification string previously set by the id command
0
normal mode (default)
180
inverted display
Examples
To set the display if IPDU #2 to inverted mode, enter the following.
To set the display of IPDU #1 to normal mode, enter the following.
pm> deluser rog
Username deleted.
pm> display 2 180
IPDU #2: Display mode set to 180 degrees rotated.
pm> display 1 0
IPDU #1: Display mode set to normal.