manualshive.com logo in svg

Cyclades PM IPDU, Installation & User Manual

Share
Download
Cyclades PM IPDU Installation & User Manual Download Page 41

 Chapter 3: Configuration        

29

Figure 3.2: Sending Firmware using Minicom

If you use a different terminal emulator, please refer to the documentation provided by the 
manufacturer on how to transfer files using the xmodem protocol.

If the file transfer is successful, the Cyclades PM IPDU console displays the login prompt. At this 
point, the upgrade process of the unit is complete; you may log into the Cyclades PM IPDU and 
perform actions as usual.

If the file transfer fails, an error message appears on the PM IPDU console, and the boot loader 
menu is displayed again so you may redo the firmware upgrade process. 

The screen would be similar to the one shown below:

Erasing firmware...done.

Downloading image. Please send file in 10 

seconds. error.   

-----------------------------

Copyright (c) 2003 Cyclades Corporation

AlterPath PM/KVM Boot Loader Version 1.1

-----------------------------

Boot Menu

1. Upgrade Firmware.

2. Boot Firmware.

-----------------------------

Enter choice (1 or 2):

Summary of Contents for PM IPDU







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands