manualshive.com logo in svg

Cyclades PM IPDU, Installation & User Manual

Share
Download
Cyclades PM IPDU Installation & User Manual Download Page 51

 Chapter 4: Command Line Interface        

39

To cycle multiple outlets, enter the following.

dbsync

The dbsync command synchronizes the user database for all PM IPDUs in the chain. This 
command is available to the admin user only.

Syntax

dbsync

Arguments

none

Examples

To synchronize the user database for all PM IPDUs in the chain, enter the following.

deluser

The deluser command deletes one username from the internal database. This command is available 
to the admin user only. 

Syntax 

deluser <user>

Arguments

<user>

 

Desired username

pm>

cycle 2, 3, 5-7

2: Outlet turned off.

3: Outlet turned off.

5: Outlet turned off.

6: Outlet turned off.

7: Outlet turned off.

2: Outlet turned on.

3: Outlet turned on.

5: Outlet turned on.

6: Outlet turned on.

7: Outlet turned on.

pm>

dbsync

pm>Synchronizing user database in IPDU #2.

Summary of Contents for PM IPDU







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands