Manual of ALT382
9
Switch on/off
Switch on
：
Checked up the power connection status before switch on. After switch on, it will enter into the operation
system within 15 seconds. Remove the printhead cap and press PRINT key to start printing when using
oil-based inks.
When using solvent-base inks, please purged printhead and drained out the dry-inks by blotting-paper.
After that, test the printing result by a blank paper. (More details see page24)
The procedure for using solvent-base inks: purge-squeeze-clean-test.
Switch off
：
Press the power button off and cover up the print head cap.
Note: Before switch off, ensured the printhead in normal condition. Forbid to purge printhead gap
before/after switch off! Just sealed by cap!
