The Manual of CYCJET Ink-jet Printer
8
Install & Test
6
、
Photoelectric Sensor Installation: 1. Screw the photoelectric clip on the printhead stand. 2. screw the
photoelectric sensor on the clip or other position as request, or use different types of sensor. When
using solvent-base inks, the sensor shall be fixed in front of printhead.
7
、
Encoder Installation: If the production line is not in constant velocity, it must be equipped with
encoder.
8
、
Power connection: connect AC adapter to suitable AC power. Connect DC to the socket behind of main
machine.
9
、
Printing Test: 1. Put the ink cartridge into the ink system in correct position. 2. Remove the cap of the
printhead, and squeeze the ink cartridge to drain out the air and cleaner until no bubbles. 3. Clean
up the surface by blotting-paper. 4. Tested by blank papers(with more details see page 26).
10
、
Product moving position: the speed of production line shall be slower than the speed of printing. A
guide plate can be installed to receive the exactly position of product which has passed the
printhead. In principal, the distance between product and print head more closer, the printing result
will be better.
11
、
Production Line adjustment: more details see page10.