The Manual of CYCJET Ink-jet Printer
14
Operation
2.2.
<Param>
- click of the button<param> opens a screen as photo9.
Photo 9
There are 7 buttons:
“speed” “Delay” ‘Direction’ “Frames” “Span” “Shaft encoder” “Bold”.
2.2.1
“Speed”
– The value shall be on the contrary of production line speed.(micro second)
2.2.2
“Delay”
– start print within the setted value(millisecond) after object passed sensor.
2.2.3
“Direction”
– management in the direction of printing content.
2.2.4
“Frames”
– after object passed across sensor, the number of times for content will be printed.
2.2.5
“Span”
– the space of time between two times contents(millisecond).
2.2.6
“Shaft encoder”
– activates the button when using encoder. Encoder could prvents from
irregualar printing result which caused by inconstant speed of production line.
2.3.
<Print>
- click of the button<print>, when it turns red means start printing
2.4.
<Browse>
- click of the button<Browse> opens a screen as photo10.
Photo 10
It is a storage disk to store jet. format files only. It allows replace printing files quickly by click related
filename.Select filename on your request and click the OK key to complete files replacement.
Delete useless files to enlarge the storage space.
What if not replace printing files, please click the CLOSE key to exit system.
Note
：
The deleted files are unrecoverable, please pay attention to delete files.