7
Your new telephone includes the highest quality NiMH (Nickel Metal Hydride)
rechargeable batteries. Follow the simple instructions below can significantly
improve your operational results.
Connect the Base Unit
1.
Plug one end of the telephone line cord into the ‘TEL. LINE’ jack at the
bottom of the base unit and plug the other end of the cord into a modular
telephone wall jack. (If your wall jack is not modular, contact your local
telephone company for assistance
.)
2.
Plug the supplied DC adapter’s barrel plug into the
‘DC 7.5V
’ jack at the
bottom of base unit and the other end into a standard 120V AC wall outlet.
Charge the Battery
1.
Press the release point on the back cover of the handset and slide
downwards to open the battery compartment.
2.
Insert the supplied two batteries into the compartment according to polarity
marks.
3.
Slide the back cover upwards until it snaps into place.
4.
Place the handset on the base unit and make sure the Charge indicator on
the base unit illuminates, which indicates the charging begins. The battery
icon on the handset LCD will change from the mode of ‘very low’, to ‘low’, to
‘medium’, to ‘full’ and repeat as a cycle.
5.
Charge all batteries for at least 15 hours prior to initial use.
INSTALLATION
