46
This equipment complies with Part 68 of FCC rules and the requirements adopted
by the ACTA. On the
bottom
of this equipment is a label that contains, among
other information, a product identifier in the format
US:CACW400B******
. If
requested, this number must be provided to the telephone company.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of the
RENs should not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact the local
telephone company. [For products approved after July 23, 2001, the REN for this
product is part of the product identifier that has the format
US:CACW400B******
.
The digits represented by
00B
are the REN without a decimal point (e.g., 03B is a
REN of 0.3B). For earlier products, the REN is separately shown on the label.]
Should you experience trouble with this equipment, please contact Customer
Service at
1-800-988-7728
for repair or warranty information. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
NOTICE
: If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this equipment ID does not disable your
alarm equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualified installer.
If your equipment should cause harm to the telephone network, the telephone
company may temporarily disconnect your service. If possible, they will notify you
in advance that temporary discontinuance of service may be required.
However, when advance written notice is not possible, the telephone company
may temporarily discontinue service without notice if such action is necessary
under the circumstances.
FCC REQUIREMENTS
