14
WALLMOUNTING BASE UNIT
The base unit can be m ounted on a wall phone plate by using the supplied wall-mounting
bracket.
1. Bring the barrel plug of the AC adapter through the
rectangular opening on the bottom of the
wall-mounting bracket.
2. Plug the adapter’s barrel plug into the 9V DC jack on
the base unit and press the cord in the slot provided.
3. Plug one end of the short telephone line cord into the
TEL. LINE jack at the bottom of the base unit.
4. Bring the free end of
the telephone line
cord through the
opening (between
the upper and lower
keyholes) in the
bracket.
5. Place the
wall-mounting
bracket on the
bottom of the base
unit and insert two short tabs on the base unit.
6. Press on the two hook-tabs, aligning it over the
respective slots and press down until it snaps into place.
7. Hold the base up next to the wall jack and plug in
the line cord.
8. Place the base unit on the posts of the wall plate
and push down until the unit is firmly seated.
9. Plug the AC adapter into a standard 120VAC wall
outlet.
Note: If you are not using a standard wall plate to m ount
the phone on wall, you m ay also mount it with ordinary
screws. Insert 2 screws with vertical separation of 3
3
/
16
or 3
15
/
16
inches and leave the screws
1
/
8
inch from the
wall. Make sure the screw heads are not bigger than
5
/
16
inch.
G ET T IN G STAR T ED
