manualshive.com logo in svg

CYBEX VR2, Owner'S And Service Manual

Share
Download
CYBEX VR2 Owner'S And Service Manual Download Page 94

The Machine

•

Axis Alignment -  The axis or pivot point of the machine 

is properly positioned to allow alignment with the elbow 
joints.

•

Accommodating  Grip -  The rotating handles accommo-

date to the user’s ability to achieve supination. A neutral 
position can be employed to emphasize the brachioradialis, 
however, the handles, designed specifically for the biceps, 
are angled slightly for proper wrist/grip alignment in full 
supination.

•

Variable Resistance -  The cam provides increased resist-

ance at the point in the range where force output of the 
biceps is the greatest.

•

10 to 205 Pounds by Fives -  The top plate provides a 

minimum weight of ten pounds. Subsequent plates in the weight stack are twenty pounds 
each. Three “slide-on” five pound incremental plates are securely positioned for easy 
access and effortless addition thereby providing 10 to 205 pounds in five pound increments.

The Biceps

•

Elbow Flexion -  The triceps brachii is 

responsible for extension of the elbow joint
as well as supination of the radioulnar joint.
The biceps are most effective at performing 
elbow flexion when the position of full 
supination is maintained throughout the 
entire range of motion. The biceps also cross 
the shoulder joint, although it is more effec-
tive at stabilizing the shoulder than moving 
it. It should be noted that any movement of 
the shoulder joint during resisted elbow flex-
ion usually decreases the effectiveness of 
the exercise by allowing unresisted change
in the biceps’ length.

•

Range of Motion -  Normal elbow motion is 

0 to 150 degrees. During isolated biceps work
the range of motion is limited by the user’s 
ability to control the biceps in flexion
concentrically and extension eccentrically. 

CYBEX VR2 Owner’s Manual

MUSCLES TRAINED

Exercise

Page 3-63

Lateral Raise

Summary of Contents for VR2







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands