manualshive.com logo in svg

CYBEX VR2, Owner'S And Service Manual

Share
Download
CYBEX VR2 Owner'S And Service Manual Download Page 68

The Machine

•

Accommodating Grip -  The outer handles 

pivot to maintain proper wrist alignment 
throughout the motion of adduction.

•

Plane of Motion -  The “straight bar”/outer handles allow 

full motion in the frontal plane (adduction). The 
parallel/narrow handles are specifically designed to allow 
motion in the sagittal plane (extension). Motion in the
sagittal plane (narrow grip pulldown) is considered more
functional and safer for the shoulder. The two individual 
handles allow the user to pull through the center of the 
body or through the front. The detrimental and minimally 

effective “behind the neck” position should be avoided by

leaning back slightly.

•

Range of Motion -  The dual-axis technology allows a 

greater range of motion in the frontal plane (wide
pulldown) than any other machine by allowing the user to start directly overhead and move 
outward, then down, then in toward the sides. The user also has the ability to perform a 
narrow grip pulldown of varying widths ranging from several inches to shoulder width.

•

Variable Resistance -  The machine provides maximum resistance at the beginning of

motion and appropriately decreases the resistance to allow full contraction at the end.

•

Two Directions of  Resistance -  The dual-axis technology functions in the wide grip

pulldown to not only provide resistance against the downward movement (by pulling 

upward against you) but also to provide resistance against the outward motion at the top of 
the wide movement (by pushing the hands together). By providing two directions of
resistance within the frontal plane latissimus stimulation is increased and the elbow flexors
are de-emphasized.

NOTE: Less weight will be employed when the handles are moved outwards due to the 
multiple directions of resistance and the increased muscular effort required of the lats.

•

10 to 305 Pounds by Fives -  The top plate provides a minimum weight of ten pounds. 

Subsequent plates in the weight stack are twenty pounds each. Three “slide-on” five pound 
incremental plates are securely positioned for easy access and effortless addition thereby 
providing 10 to 305 pounds in five pound increments.

CYBEX VR2 Owner’s Manual

Exercise

Page 3-37

Pulldown - Dual Axis

Summary of Contents for VR2







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands