background image

Cybex Eagle  11120 Standing Calf Owner’s Manual

Assembly

Page 4-1

4 - Assembly

TOOLS REQUIRED

7/32” Allen wrench

• 

3/4” Allen wrench

• 

9/16” Wrench

• 

3/4” Socket or wrench

• 

External snap ring pliers

• 

Phillips screwdriver

• 

Medium weight automotive engine oil

• 

Torque Wrench

• 

NOTE:  Two people will be required for this procedure.

NOTE:   It is the responsibility of the facility owner/owner of the 

equipment to ensure that there is appropriate clearance 
around each machine to allow for safe use and passage.

1.  

Read and understand all instructions thoroughly before starting any of the 
procedures listed on this instruction sheet. 

2.  Verify you have received the appropriate confi guration.

Verify that you received the correct color machine that you ordered.

A. 

Verify you received weight plates and weight plate decals.

B. 

Verify you received the Cybex Eagle Calf Raise Owner’s Manual.

C. 

Verify you received the warranty sheet. 

D. 

3.  Move to desired location.

Note the diminsions of the machine:

A. 

idle -  

58 L x 41 W x 58 H inches

 

147.32 L x 104.14 W x 147.32 H cm

in use -  66 L x 41 W x 58 H inches
 

167.64 L x 104.14 W x 147.32 H cm

Machine Weight (with weight stack) - 740 lbs. (335.66 kg)

Determine if you can move your machine through the required doorway(s).

B. 

If the machine fi ts through the doorway(s), move machine to desired location and skip to step 5. 

C. 

If weight stacks need to be installed proceed to step 6.

D. 

If the machine does not fi t through the door-way(s) then see step 4.

E. 

4. Doorway 

Instructions.

NOTE:   If your machine fi ts through the doorway then skip step 4. 

If your machine does not fi t through the doorway then perform step 4.

Carefully remove each (standard) cone-shaped shipping support using a 3/4” socket or wrench.

A. 

3

130.5

270

121.5

112.5

103.5

94.5

85.5

 31.5

58.5

49.5

40.5

76.5

67.5

 22.5

13.5

290

130

170
190

230

210

150

250

50

90

70

110

30

2

1

4

   

 

  

 
 1 

11090-392 

FOOT 

PAD

  2 

12000-560 

DECAL, WEIGHT PLATE (30- 290) 

  3 

12000-561 

DECAL, WEIGHT PLATE (310-490) 

  4 

19 

4000C101 

WEIGHT STACK PLATE

ITEM    QTY    PART NO.           DESCRIPTION

Summary of Contents for Eagle 11120 Standing Calf

































Reviews: