CYBEX Arc Trainer 425A Owner'S Manual Download Page 59

Page: 59 / 64

Customer

Service

Page 6-1

6 - Customer Service

Contacting Service

Cybex Arc Trainer 425A Owner’s Manual

Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time.

For Cybex customers living in the USA, contact Cybex Customer Service at

888-462-9239.

For Cybex customers living outside the USA, contact Cybex Customer Service at

508-533-4300

or fax

508-533-5183.

Find information on the web at www.cybexinternational.com or by e-mail at [email protected].

Serial Number and Voltage

Your serial number and voltage can be found on the front of the unit. See Figure 1.

For your convenience record your serial number and voltage below so that you will have it ready if you

call Cybex Customer Service.

Serial Number

Voltage

Figure 1

Serial Number

Summary of Contents for Arc Trainer 425A

































































Search results

Summary of Contents for Arc Trainer 425A

Reviews:

Brands by name

Popular brands

CYBEX Arc Trainer 425A, Owner'S Manual

Search results

Summary of Contents for Arc Trainer 425A

Reviews:

Brands by name

Popular brands